A Brazilian armchair in solid timber, photographed against stacked lumber on the factory floor

Furniture sourcing intelligence · Brazil

Finding what is worth making in Brazil, and verifying who can make it.

Two halves of the same decision. We scout the design and the makers behind it, and we qualify the factory before its name reaches you. Buyer-side only: a fixed project fee, no factory commission, no markup on product.

A green velvet sofa with loose cushions against a raw concrete wallA walnut armchair with a pale leather seat, photographed in the workshop that made itA long dark wood dining table with upholstered chairs in front of full-height sheer curtainsLeather hides in five colours hung above two bedside tables in wood and marbleA terracotta swivel armchair beside an oval table and a black fluted sideboardA mustard upholstered armchair and ottoman on slim steel legs in a white interiorA tan leather lounge chair with solid wood sides on a four-star swivel baseA walnut kitchen island with two deep drawers pulled open, divided for plates and cookwareA finished dining chair standing on a stack of sawn timber in front of a photographic backdrop on the factory floorA caned hardwood armchair with tan leather cushions beside a built-in window benchA walnut shelving system with stone shelves and low cabinets, being arrangedA brown leather reclining sofa with an extended footrest, open to a gardenA hardwood and suede armchair at a built-in desk in a whitewashed brick interiorA round upholstered armchair in sand bouclé beside a glass side table and dark wood shelving

Design and curation

We find the work, not just the factory that can copy it.

Studios, independent designers and the makers behind them, scouted by looking rather than by searching a directory. For a buyer building a range, the piece comes before the plant.

Authored Brazilian seating shown on white plinths

Factory vetting

Every factory is verified before you ever see its name.

Capacity claims, export history, subcontracting and quality control are checked on site and written down. A factory that cannot pass does not reach your shortlist, however well it photographs.

A finished sofa moved across a Brazilian production floor

Fixed fee, yours outright

One agreed fee. The reports belong to you.

No retainer that renews itself, no percentage of your order value, no commission paid by the factory behind your back. Audit reports, scorecards and cost breakdowns are delivered as files you keep and can hand to anyone inside your organization.

Specification documents, swatches and finish references on a table

About

Vista works on both sides of a sourcing decision. We find product and authorship a buyer would not reach alone, and we qualify the manufacturers behind it for buyers who cannot afford to get the choice wrong. Some clients come for one half, some for both.

Our founders bring more than 20 years in home and décor, 14 of them in the Brazilian furniture industry, where they built and ran one of the country's leading furniture brands. That work produced something more useful than a supplier list: a working sense of which manufacturers can execute at export standard, which ones only sound like they can, and what separates a factory visit that reveals the truth from one staged for a guest.

We work across every Brazilian producing region, in every furniture category, for buyers in the United States, Canada, Europe, the Caribbean and Latin America.

A craftsman finishing a solid wood chair frame
20+

years in home and décor

14

years in the Brazilian furniture industry

120+

qualified manufacturers in our working network

$0

commission taken from any factory, ever

Selected work

What You Actually Receive

Three documents sit at the centre of every engagement. They are written to be read by your merchandising, finance and compliance teams without us in the room.

Aerial view of a Brazilian furniture plant

Factory Audit Report

Capacity, machinery, finishing, wood sourcing, quality control and export history, scored and dated.

Operator sanding a curved component

Supplier Scorecard

Every candidate compared on the same criteria, so the shortlist can be defended internally.

Hands comparing upholstery swatches

Landed Cost Breakdown

Ex-works, packaging, freight, duty and compliance testing, built per SKU.

Approach

The Consultancy That Works Differently

Most firms serving this market are paid by the factory. Three decisions follow from refusing that.

  • 01

    We only work on furniture, and only in Brazil

    Not one vertical inside a multi-category sourcing firm. Every hour of expertise is furniture-specific and Brazil-specific.

  • 02

    Built to qualify factories, not to introduce them

    An introduction is the easy part. We are paid to find out whether a capability claim survives a real production run.

  • 03

    A fixed fee. The factory never pays us.

    You buy directly from the manufacturer at the manufacturer's price. We hold no commission, no markup and no stock, so the shortlist answers to you.

Close detail of a leather sofa seat and cushion
Close detail of upholstery weave

The standard

Access to Brazilian factories is easy. Knowing which access is worth having is the work.

100%of factories visited before they are recommended
$0factory commission
6checks, assembled into a scope per project

Method

Six Checks. Your Project Uses the Ones It Needs.

A standard, not a package. There is no fixed order, and the scope is written once we understand what your case actually requires.

  • Supplier Vetting

    Corporate, export and reference checks on every candidate before any visit is scheduled.

  • Factory Qualification

    On-site assessment of capacity, machinery, finishing, wood sourcing and quality control.

  • Production Intelligence

    Real lead times, subcontracting and capacity checked against the factory's own calendar.

  • Export Readiness

    Packaging, documentation, testing and compliance prepared for the destination market.

  • Commercial Alignment

    Terms, tooling, minimums and payment structure agreed in writing before the order.

  • Quality Validation

    Sample approval, in-line checks and pre-shipment validation against your specification.

Design Scouting

When the Supplier Is a Studio, Not a Plant.

A separate engagement, for buyers building a range around Brazilian authored design rather than around volume.

São Paulo is where Brazilian authored design is shown and where a good deal of it is made, in studios of five or ten people. A factory you qualify once and buy from for years. A studio launches, changes direction and runs out of capacity, and the person whose hands make the difference may be the only one who can.

So the reading is different: how much of the piece is hand and how much is machine, what the studio can sustain in a year, and whether it is willing to produce for a third party at all. A shortlist before anyone travels, visits to the studios that survive it, and a written report with a verdict on each one.

Resin and glass panels stacked in a plywood crate in a São Paulo studio

The alternatives

Side by Side

Four ways to buy furniture in Brazil, and who each one actually answers to.

Scroll the table sideways to compare every column.

VistaTrading companyCommissioned agentDirect purchase
Who pays the feeYou, by agreed scopeBuilt into the product priceThe factory, per orderNot applicable
Conflict of interestNone. No factory commissionMargin depends on what it sells youA higher commission favours certain factoriesNot applicable
Who holds the invoiceYou, directly with the factoryThe trading companyVariesYou
Factory verificationDocumented, before commitmentVaries, rarely sharedVariesYour responsibility
What you keepAudit reports, scorecards, cost modelsGoodsIntroductionsOrders

FAQ

Brazilian Furniture Sourcing, Answered

The ten questions buyers ask before a first project.

Who pays Vista, and do you take commission from the factories?

The buyer pays Vista. We take no commission from the manufacturers we qualify and we do not mark up product. The fee is agreed by scope before the work starts, so a recommendation never depends on which factory pays more.

What is the difference between a furniture sourcing agent and a sourcing consultancy in Brazil?

A sourcing agent typically connects a buyer to factories and is paid per order, often by the factory. A sourcing consultancy is paid by the buyer to assess factories against the buyer's requirements, structure the commercial terms and validate production. Vista works as a consultancy.

How do you vet a furniture factory in Brazil?

Vetting combines document checks, an on-site audit and a production test. We review corporate and export records, then assess capacity, machinery, finishing, wood sourcing and quality control, and confirm the result with a sample run before any order.

Which furniture categories can be sourced from Brazil?

Upholstery, leather, solid wood, outdoor, casegoods, panel-based and RTA furniture, contract and FF&E, children's furniture, rugs and decorative accessories. Strengths vary by producing region, which is why the factory is matched to the category and not the other way around.

What compliance standards apply to Brazilian furniture exported to the US and Europe?

For the United States: California TB117-2013 for upholstered pieces, CARB and TSCA Title VI for formaldehyde in composite wood, and the Lacey Act for timber legality. For Europe: EU timber due-diligence and chemical regulations plus the buyer's own testing protocols.

Do I buy from the factory or from Vista?

From the factory. The invoice is issued in your name, at the factory's price, and the goods never pass through us. Vista is not a trading company and holds no stock.

Can Vista help design a furniture collection for production in Brazil?

Yes. We design collections or support your design team, adjusting construction, joinery, materials and finishes to what Brazilian factories do well. Designing with production in mind reduces sampling rounds and cost surprises.

What determines how long a project takes?

Category, finish, the number of factories under review and whether the product needs certification testing or custom tooling. We set the schedule during scoping, once your requirements are clear.

Do you sign NDAs and non-circumvention agreements?

Yes. We sign confidentiality and non-circumvention terms before sharing any factory or buyer details. This protects both parties and is part of our standard contract.

What does the first project with Vista look like?

A diagnostic call, then a scoped proposal. The first phase is usually category definition and a shortlist of qualified factories, moving on through sampling, commercial alignment and quality validation.

All 32 questions, answered in full

Coverage

One Country. Six Furniture Poles.

Brazilian furniture is made in clusters, and each one is good at something different. We work across all of them, and we say plainly when your category belongs somewhere other than where you started.

A furniture plant among the vineyards of the Serra Gaúcha
  • RS
    Rio Grande do SulBento GonçalvesUpholstery, casegoods and the country's largest furniture fair.
  • SC
    Santa CatarinaSão Bento do SulSolid wood and pine built for export since the 1970s.
  • PR
    ParanáArapongasVolume upholstery and panel furniture.
  • SP
    São PauloVotuporanga and MirassolCasegoods, metal and the widest supplier base.
  • MG
    Minas GeraisUbáPanel furniture at scale, close to the domestic market.
  • PE
    PernambucoGravatáSolid wood and craft production serving the Northeast.

Insights

Browse Every Guide

Compliance, regions, materials and origin comparisons, written for buyers planning a season.

Comparison

Brazil vs Mexico for Furniture Sourcing

Capacity, certified hardwood and design depth across the two nearshoring origins.

Comparison

Brazil vs Vietnam for Furniture Sourcing

Species, legality, transit time and tooling, compared for a buyer leaving Asia.

Comparison

The Real Cost of Manufacturing in Brazil vs Asia

Where the cost gap actually sits once freight, duty and rework are counted.

Market & Trade

The 25% Brazil Tariff Will Not Send Buyers Back to Asia

Why the arithmetic of origin did not change the way the headlines suggested.

Compliance

Timber Sourcing in Brazil: EUDR and Lacey Act

Species naming, country of harvest and the records that travel with the wood.

Compliance

Pre-Shipment Inspection: What It Catches and What It Misses

Why a single check at the end of the line is not a quality program.

Regions

Bento Gonçalves: Brazil's Largest Furniture Cluster

What the Serra Gaúcha pole actually makes, and for whom.

Regions

Brazil's Furniture Regions Explained

Which category belongs to which pole, and why it is rarely the one you started with.

The model

Sourcing Agent vs Trading Company in Brazil

Who pays whom, and how that decides the shortlist you are shown.

Method

Furniture Factory Audit in Brazil: What Gets Checked

Capacity, machinery, finishing and subcontracting, line by line.

Method

How to Vet a Factory: 10 Red Flags and 10 Green Lights

The signals that separate a capability claim from a production fact.

Materials

Brazilian Solid Wood Furniture

Certified timber, construction and what survives an ocean crossing.

Materials

Managing Wood Moisture Content for Northern Climates

Why furniture that is perfect in Brazil can split in a heated apartment.

Segments

Hospitality and Contract Furniture From Brazil

Specification, durability standards and lead times for FF&E programs.

Trade fairs

Movelsul Brasil: Guide for International Buyers

How to work the floor so a stand visit produces verified information.

Close detail of a turned and jointed chair frame

Next step

Ready to become the obvious buyer in your category?

Tell us the category, the destination market and where the project stands. We come back with the questions that decide scope.

Contact

Start with a diagnostic.

A short note is enough. Confidentiality and non-circumvention terms are signed before any factory or buyer details are shared.

A craftsman planing a wooden component by hand